 |
Remove Banks iQ from vehicle |
 |
|
 |
Remove micro-SD card (if present) |
|
|
 |
Power on banks iQ |
|
|
 |
Select "Productivity" mode
From the "Mode Select" screen, scroll to select the
"Productiviy" Mode.
|
|
|
 |
Go to the Desktop
Select "Desktop" to enter the Windows Mode |
|
|
 |
Suspend the Banks iQ
After opening
the desktop screen you need to select “Suspend” through
the start screen. |
|
|
 |
Connect Banks iQ to your computer
Locate the supplied USB cable and connect the Banks iQ to
a USB port on your PC.
microSoft ActiveSync or Windows Mobile Device Center should
detect the connection and open a new window. If a connection
is not established within about 10 seconds, unplug the USB
cable from your computer, then tap the 'Start' button on
the Banks iQ, select suspend, and then plug the USB cable
back into the computer |
|
|
 |
Open Banks iQ update utilityOnce the Banks iQ Update Utility
opens, it will take a few moments to establish a connection. |
|
|
 |
Verify connection
Make sure that the Update
Utility displays 'Connected' and the button on the screen
is green before proceeding.
Your Banks iQ is now connected to the PC and is ready to
be updated. |
|
|
 |
Check for iQ Updates
Click on 'Check for iQ Updates' button to search for the
latest updates. This will automatically search our database
for the most up-to-date downloads currently available. |
|
|
 |
Select latest version
Select the latest version located on the left side of the
screen under 'Banks iQ versions available on the server'. |
|
|
 |
Compare update to current version
Compare the 'Currently Installed Version' to the 'Selected
Update Version'.
If the message '<Not Available>' appears
beside 'Currently Installed Version', your Banks iQ has the
latest version installed and does not require updating. Do
not proceed from this point. |
|
|
 |
Check for sufficient memory
If updating is required, make sure there is sufficient memory
space before beginning the update process. If there is not
enough space, you may need to remove some files to make room. |
|
|
 |
Begin update
Click 'Update' to begin updating the Banks iQ. |
|
|
 |
Allow update to complete
The update
will take several minutes to complete. Please be patient
and do not disconnect the Banks iQ. |
|
|
 |
Power off Banks iQ & disconnect
After the update is complete, turn the Banks iQ OFF and disconnect
the USB cable. |
|
|
 |
Power on Banks iqTurn the Banks iQ ON and allow the system to
boot up.
Note: After an update, certain modes may not
populate until after being connected with your vehicle. This behavior is normal. |
|
|
|
Select "Productivity"
From the 'Mode Select' menu, scroll to locate and
press on the 'Productivity' button. |
|
|
 |
Select "System Info"
Scroll to locate the 'System Info' button and press it to
verify the Banks iQ version. |
|
|
 |
Verify the update
Compare this version with the one selected in the Banks iQ
Update Utility. If the versions are the same the update is
complete. At this point, you can reinsert your micro-SD card
(if present).
If the version is different than the one you have
selected, go back to the beginning of Step
3 and repeat the
portions of the process starting with connecting the Banks
iQ to the PC. |
